Could Waste Plastic Become A Useful Fuel Source?

Image caption,

These plastic bales are heading for recycling - but most plastic is discarded

Plastic waste dumps, says Prof Erwin Reisner, could be the oil fields of the future.

"Effectively, plastic is another form of fossil fuel," says Prof Reisner, who is professor of energy and sustainability at the University of Cambridge. "It's rich in energy and in chemical composition, which we want to unlock."

But the chemical bonds that make up plastics are made to last and, of the seven billion tonnes ever created, less than 10% has been recycled.

Dilyana Mihaylova, plastics programme manager for the Ellen MacArthur Foundation, says: "Our extractive, take-make-waste economy [means] billions of dollars' worth of valuable materials are lost."

Worldwide, more than 400 million tonnes of plastic is produced every year - roughly the same weight as all of humanity. Today, around 85% ends up in landfill or is lost to the environment where it will stay for hundreds, perhaps thousands, of years.

Now the race is on to find the best way to break those chemical bonds and reclaim the Earth's precious resources locked into plastic.

Mechanical recycling, where waste plastic is washed, shredded, melted and reformed, degrades plastic over time and can result in inconsistent quality products.

The plastics industry is keen on chemical recycling, where additives are used to alter the chemical structure of waste plastic, turning it back into substances that can be used as raw materials, perhaps for making fuel like petrol and diesel.

"So," says Ms Mihaylova, "just as we can't recycle our way out of the plastics pollution crisis, we can't rely on plastics-to-fuel processes to solve the problem either."

Could a new solar-powered system show the way forward?

Image source, Cambridge University

Image caption,

Erwin Reisner (left) and his team Subhajit Bhattacharjee (centre) and Motiar Rahaman (right)

Prof Reisner and his team have developed a process that can convert not one, but two waste streams - plastic and CO2 - into two chemical products at the same time - all powered by sunlight.

The technology transforms CO2 and plastic into syngas - the key component of sustainable fuels such as hydrogen. It also produces glycolic acid, which is widely used in the cosmetics industry.

The system works by integrating catalysts, chemical compounds which accelerate a chemical reaction, into a light absorber.

"Our process works at room temperature and room pressure," he says.

"Reactions run automatically when you expose it to sunlight. You don't need anything else."

And, assures Prof Reisner, the process produces no harmful waste.

"The chemistry is clean," he says.

Other solar-powered technologies hold promise for tackling plastic pollution and CO2 conversion, but this is the first time they have been combined in a single process.

"Combining the two means we add value to the process," says Prof Reisner. "We now have four value streams - the mitigation of plastic waste, the mitigation of CO2, and the production of two valuable chemicals. We hope this will bring us close to commercialisation."

In addition, Prof Reiner says his system can handle otherwise unrecyclable plastic waste.

"Usually, plastic contaminated with food waste goes to incineration, but this plastic is really good for us. In fact, food is a good substrate - so it makes our process work better."

Researchers around the world are looking for ways to turn unwanted plastic into something useful.

When broken down, the elements of plastic can be re-made into a myriad of new products including detergents, lubricants, paints and solvents, and biodegradable compounds for use in biomedical applications.

Nature has found ways of breaking down polymers - substances made up of very large molecules - and plastic is a synthetic polymer.

Image source, University of Portsmouth

Image caption,

Victoria Bemmer from the University of Portsmouth is developing enzymes that can break down plastic

"There are already bacteria out there that have enzymes designed to break [polymers] down," says Dr Victoria Bemmer, senior research fellow at the University of Portsmouth.

"We can tweak these enzymes by changing the structure of them very slightly - to make them go faster, make them more firm or stable."

Using machine learning, Dr Bemmer and her team have developed variants of enzymes adapted to deconstruct all varieties of polyethylene terephthalate (PET), a type of polyester.

The enzymes break the plastic down in a similar way to chemical recycling, says Dr Bemmer but, because they are akin to enzymes found in nature, the process can be done in much more "benign conditions".

Where chemical recycling uses chemicals, the Portsmouth University team are able to use water. And the highest temperature they need is 70C, meaning energy consumption can be kept low compared to other processes.

Dr Bemmer and her team are developing their enzymes further and hope that their work will help them create a sustainable circular economy for plastic-based clothing too.

Polyester made from PET is the most widely used clothing fibre in the world.

However, recycling synthetic fabrics using enzymes is not easy. The addition of dyes and other chemical treatments make it difficult for them to be degraded in a natural process.

"Polyester is an absolute pain," says Dr Bemmer. "Plus, it's very rarely just pure polyester. You find mixed fibres as well."

The team hope their enzymes will reduce the PET in waste textiles to a soup of simple building blocks, ready to be made back into new polyesters.

"We're at a very early stage," says Dr Bemmer. "We don't know yet if the dyes and additives to these fabrics will inhibit the action of the enzymes on the polyester chain. Hopefully they won't have an impact and we can just carry on but if they do, we can develop our enzymes further."

Worldwide production of plastic continues to increase, and is expected to triple by 2060. For many, recycling remains the focus in addressing the issue, but some argue this will never be enough.

Back in Cambridge, Prof Reisner's team are taking "baby steps in the direction" of commercialisation. They plan to develop the system over the next five years to produce more complex products and hope that one day the technique could be used to develop an entirely solar-powered recycling plant.

Around 600 million tonnes of syngas is already produced every year, says Prof Reisner, but it's largely from fossil fuels.

"If we can make syngas, we can access almost all of the petrochemical industry and make it sustainable."

RECENT NEWS

From Chip War To Cloud War: The Next Frontier In Global Tech Competition

The global chip war, characterized by intense competition among nations and corporations for supremacy in semiconductor ... Read more

The High Stakes Of Tech Regulation: Security Risks And Market Dynamics

The influence of tech giants in the global economy continues to grow, raising crucial questions about how to balance sec... Read more

The Tyranny Of Instagram Interiors: Why It's Time To Break Free From Algorithm-Driven Aesthetics

Instagram has become a dominant force in shaping interior design trends, offering a seemingly endless stream of inspirat... Read more

The Data Crunch In AI: Strategies For Sustainability

Exploring solutions to the imminent exhaustion of internet data for AI training.As the artificial intelligence (AI) indu... Read more

Google Abandons Four-Year Effort To Remove Cookies From Chrome Browser

After four years of dedicated effort, Google has decided to abandon its plan to remove third-party cookies from its Chro... Read more

LinkedIn Embraces AI And Gamification To Drive User Engagement And Revenue

In an effort to tackle slowing revenue growth and enhance user engagement, LinkedIn is turning to artificial intelligenc... Read more